Roofers aim to call you within the hour.
Find my roofer
Colorbond colours

GullyEarthy warmth, without a harder energy rating.

Gully is a warm, earthy mid-tone drawn from river clay and creek stones. Its solar absorptance of 0.64 sits exactly on the limit the building code uses for its simpler roof pathway in climate zones 1 to 5. That makes it about as deep as a roof can go before colour starts to complicate the energy rating on a new home.

On-screen colour is approximate. Always look at a real sample sheet outside.

Cooler (reflects more sun)Hotter

Solar absorptance 0.64 (BlueScope figure).

Updated 27 October 2026 · Written by the Find My Roofer team · How we check our facts

What does Gully look like?

BlueScope draws it from river clay, pebbles and stone, and calls it grounded and subtle. In sun it shows a gentle brown-grey warmth. BlueScope says it complements softer or limewashed brick, natural stone and rendered walls.

Its palettes put Gully trims on a Paperbark roof, place it between Ironstone and Surfmist, or pair it with Dune and carry Bluegum through the inside. The warmth shows most in late afternoon sun, so that's a good time to hold a sample sheet up against your walls.

Why 0.64 matters if you're building

Under the NCC 2022 Housing Provisions, a home in climate zones 1 to 5 can use the elemental deemed-to-satisfy pathway, a checklist approach, if its roof's solar absorptance is 0.64 or less. Darker roofs have to go through a 7 star NatHERS rating instead. Gully lands right on the line, so it's in.

In zones 6 to 8, any roof colour is fine under either pathway. The classes come from the same figure: NSW BASIX calls Gully medium, while the older NCC 2019 bands called anything above 0.60 dark. Your builder or energy assessor will know which applies to your job.

Gully or Wallaby?

GullyWallaby
ToneWarm, earthy, leans brownMuted grey with a soft brown undertone
Solar absorptance0.640.64
Made in UltraNot listedYes
BlueScope's suggested partnersLimewashed brick, stone, renderBrown timber, red-brown brick, concrete, black steel

What we'd weigh up

If your walls are cream, sandstone or pale render and you want a roof with some warmth, Gully is a strong pick that won't push a new build onto a harder rating path. Within 200 m of breaking surf, we'd look at Wallaby in Ultra instead, since Gully isn't on the Ultra list. A note on who we are: an independent service, not affiliated with BlueScope, the Colorbond trademark owner.

Want a roofer to take a look?

Tell us the job and your postcode. We match it with a Find My Roofer certified roofer who specialises in that kind of work, and they call you to quote. Your number goes to them alone.

Find my roofer
Questions

Straight answers.

Is Gully brown or grey?
Somewhere between. BlueScope describes earthy river-clay tones, and on most houses it reads as a warm grey-brown. Real sheets in sunlight settle the question.
What trims suit a Gully roof?
BlueScope's palettes finish it with Surfmist, or put it beside Ironstone. Gutters in Gully keep things quiet; a pale trim makes the roofline stand out.

Where this information comes from

Every fact and rule on this page comes from the sources above, checked on the dates shown. How we write and check these pages.

Find my roofer